B-CHEM
EPOXY SYSTEMS
- BCR 601 + BCC 922 - phr 25 (4:1)
System for bonding the reinforcing mesh on marble and granite slabs. Fast system with excellent adhesion and excellent gloss. Suitable for manual applications, and on short automatic lines with fast cycles (2h).
- BCR 601 + BCC 750 - phr 50 (2:1) / BCR 601 + BCC 730 - phr 30 (3.3:1)
System for the resination of high quality marble and granite. The low viscosity enables penetration into very thin cracks. It has high transparency and high resistance to yellowing. Suitable for manual applications, and on automatic lines with 4h cycles. Two mixing ratios available.
- BCR 601 + BCC 885 - phr 37 (2.7:1)
Epoxy system with extremely low viscosity, used for the resinating of marble and granite. It is certainly the highest quality system for granite. Fast system (cycles of 2.5 / 3 hours on automatic ovens).
- BCR 501A + BCC 501B - phr (2:1)
High quality “gel-like” epoxy system with neutral color, low tendency to yellow and good adhesion on slightly damp stones. The system is mainly used in the stone
processing industry for the “weather-resistant” bonding of marble, granite, artificial stones and building materials (terrazzo, concrete). The gel-like consistency enables high resistance to sliding on vertical surfaces, but does not affect the use in thin joints. Other materials, such as wood, glass, paper and some plastics (e.g. hard PVC and polyester) can also be glued.
- BR 822 + BH 822 - phr 25 (4:1)
Epoxy system formulated for the consolidation of marble or granite blocks. The characteristics of the system allow to consolidate very defective blocks and guarantee a perfect seal during cutting. The thixotropy of the formulation makes the system easy to use even vertically. The softness of the system allows excellent workability with manual tools. The hardening time guarantees the workability of the formulation even in places with a very hot climate. The system has a good reaction rate even at low temperatures.
- SEA 120A + IPA 120B - phr 100 (1:1)
Two-component epoxy system for gluing marble and granite, loaded with non-abrasive aggregates that allow excellent workability to the tool. Medium curing time.
- SEA 130A + IPA 130B - phr 100 (1:1)
Two component epoxy system, unfilled, solvent free. Good resistance to delamination and water. Fast hardening at room temperature. Universal adhesive for different
types of substrates: metal, wood, glass, plastic, composite materials.